Colour cream for long lasting intense colour with day 15 colour reactivator.
How to use:
Follow the instructions in the leaflet contained in the package:
STEP 1
Put on colourist gloves and twist off the tip of the Developer 1 bottle cap before beginning. Remove cap from bottle.
STEP 2
Pierce the opening of the Color Creme 2 tube completely with the point provided in the top of the cap. Do not point either end of the tube toward the face while opening or using. Squeeze the entire contents of Color Creme 2 tube into the Developer 1 bottle and recap the bottle.
STEP 3
Place your finger over the open tip, point away from your face and shake thoroughly until the mixture is totally blended. The Developer bottle is now your hair colour applicator bottle.
CAUTION: Do not squeeze or put pressure on Color Creme tube until you have pierced the tube opening completely. Use care in working with tube contents. Contact between contents and eyes may cause blindness.
NOTE: Never leave the tip of the developer bottle unopened after mixing – the container may burst. Use immediately and do not save any unused mixture.
Touch-Up Application
Choose a Touch-Up Application if you colour every 4–6 weeks with the same shade.
IMPORTANT: To achieve the most even colour results from root to tip, apply the product to new uncoloured growth root area, wait 20 minutes. Then apply to rest of the hair for 10 minutes. Follow instructions below carefully for best results.
Apply to Root Area
STEP 4
Make 14-inch partings throughout your dry, unwashed hair with regular applicator tip. Apply colour onto new growth root area until completely saturated.
STEP 5
Leave colour on new growth root area for 20 minutes.
STEP 6
Resistant greys: leave mixture on hair an additional 10 minutes.
Apply to Rest of the Hair
STEP 7
Apply remaining product to the rest of the hair. Make sure all the hair is completely saturated.
OPTIONAL: If you choose to use full coverage comb for easier application, remove applicator tip and attach comb on protective Creme Developer 1 bottle.
STEP 8
Pile hair loosely on top of your head.
STEP 9
Let develop for an additional 10 minutes.
Rinse Out
When time is up, add a small amount of warm water to the hair and lather colour mixture through the hair. Rinse until water runs clear.
Condition and Recondition
Apply half the tube of Conditioner 3 through hair. Leave on for 1 to 2 minutes. Rinse thoroughly with warm water. Style as usual. Use the other half of the Conditioner 3 two weeks after you colour.
All-over Application
Choose All-over Application if:
• You have never coloured your hair.
• You have not coloured in three months or longer.
STEP 10
Attach regular applicator tip onto the protective Creme Developer 1 bottle.
STEP 11
Make 14-inch partings, apply product onto dry, unwashed hair until hair is completely saturated and the colour mixture is evenly distributed.
STEP 12
Pile hair loosely on top of your head.
Timing
Leave on for 30 minutes.
Rinse Out
When time is up, add a small amount of warm water to the hair and lather colour mixture through the hair. Rinse until water runs clear.
Condition and Recondition
Apply half the tube of Conditioner 3 through hair. Leave on for 1 to 2 minutes. Rinse thoroughly with warm water. Style as usual. Use the other half of the Conditioner 3 two weeks after you colour.
Warning and cautions:
You must perform an allergy test 48 hours before use.
• Avoid contact with eyes.
Do not colour your hair if:
• You have a rash on your face or sensitive, irritated and damaged scalp.
• You have ever experienced any reaction after colouring your hair.
Ingredients:
Contains: Phenylenediamines , Resorcinol , Ammonia , Hydrogen Peroxide.
Read more
